A-A-2539A
April 17, 1989
COMMERCIAL ITEM DESCRIPTION
HAMMER, HAND, BRICKLAYERS
The General Services Administration has authorized the use of this commercial item description in preference to Federal Specification GGG-H-86, Type III, Styles A and B.
This commercial item description covers forged steel hammers used for driving nails, hammering metal, breaking stone, and similar uses.
SALIENT CHARACTERISTICS
The hammers shall conform to ANSI B173.6 and requirements stated herein.
Finish. Polished striking face shall not be coarser than 63 microinches AA/protective coating of the entire head to deter rusting. In accordance with ANSI/ASME B46.1M.
Handle. Hickory, (Grade B, or better) clear lacquered or fiberglass with handgrip. Handle shall be similar to figure 1.
Eye number. The eye number and dimensions (wood only) maybe furnished as a number 1 or 3 and shall be as specified in figure 2.
Identification marking. Each hammer shall be engraved, etched or stamped with the manufacturer’s name or identifying symbol and the state or country of manufacture in such a manner that it will be permanent to the extent that it will remain clear and legible throughout the life of the item.
|
Head Weight + 2 ozs. |
Handle Type |
Overall Length + 1 inch |
Eye Dimensions + 1/16 inch |
National Stock Number |
|
|
|
|
|
B |
C |
|
|
Ounces |
|
Inches |
Inch |
Inches |
|
|
24 |
Hickory |
12 |
35/64 |
1-7/64 |
5120-00-236-3730 |
|
24 |
Fiberglass |
12 |
|
|
5120-00-900-6106 |
DISTRIBUTION STATEMENT A. Approved for public release; Distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business