October 1, 1979
COMMERCIAL ITEM DESCRIPTION
JACK KIT, HYDRAULIC, HAND (10-TON)
The General Services Administration has authorized the use of this
Commercial Item Description in lieu of Federal Specification GGG-3-60.
This commercial item description covers a hydraulic hand jack with various attachments used for exerting a pulling or pushing force. The National Stock Number (NSN) assigned to this kit is 5120-00-595-8388.
Salient characteristics:
Jack. The jack shall be a 10-ton rested remote hydraulic hand jack with a manually operated pump, a remote ram, and a hose assembly connecting the two. The pump shall have a lever operated handle and a relief valve. The reservoir capacity shall be 37 cubic inches minimum and the displacement per stroke shall be .13 cubic inch minimum. The ram shall have a nominal 12-inch collapsed length of 6 ft with a quick disconnect coupling at the ram end.
Attachments. The kit shall include the following attachments. The attachments shall safely withstand direct (concentric) loads of 10,000 lb and indirect (offset) loads of 4,000 lb.
One clamp (offset head)
One clamp end toe
One serrated or grooved saddle
One spreader toe
One 90o concave V-base
One flat base
One flexible (rubber) head, 3-inch diameter, and one flexible (rubber) head, 5-inch diameter
One male connector
Two 6-ft minimum length chains, 5/16-inch minimum diameter of link cross section, each furnished with a hook on one end.
One chain pull plate
One adjustable body spoon
One wedge head
One adjustable extension
One plunger toe
One ram (body toe)
Steel, quick-disconnect extension tubes. One 5 to 6 inches long, one 10 to 12 inches long, and additional tubes to total a minimum of 50 inches
Two male adapters
One female adapter
Four lock pins
Two extension tube connectors
Manual. A manual on the operation and maintenance of the jack kit shall be furnished. If a list of the components is not shown in the manual, a separate list shall be included.
Case. The jack kits shall be furnished in a plastic, wood, or metal case suitable for carrying and storing the kit.
Marking. Jacks shall be permanently and legibly marked with the rated capacity of the jack and the manufacturer’s name or trademark. Other major components shall be marked consistent with commercial practice.
Workmanship. The jack kits shall free from imperfections which may affect their appearance, serviceability, or durability. All parts shall be cleaned and free of extraneous materials and burrs, and sharp edges removed. Exposed surfaces shall be coated or finished in accordance with the manufacturer’s standard practice, except that cadmium plating shall not be used.
Certification. The contractor shall certify that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producer’s own drawing, specifications, standards, and quality assurance practices and is the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business