INCH-POUND
MIL-DTL-81306B
30 January 2007
SUPERSEDING
MIL-T-81306A
28 March 1986
DETAIL SPECIFICATION
TOOL, INSTALLATION FOR ADJUSTABLE PLASTIC
AND METAL TIEDOWN STRAPS
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers tools used to install SAE-AS23190 tiedown straps on
wire bundles (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to the Naval Air
Systems Command (Commander, Naval Air Warfare Center Aircraft Division, Code
491000B120-3, Highway 547, Lakehurst, NJ 08733-5100), or e-mailed to
thomas.omara@navy.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 5120
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business