A-A-1358 Wrench, Combination, Open End And 15 Deg. Offset Box Opening

A-A-1358

January 15, 1980

COMMERCIAL ITEM DESCRIPTION

WRENCH, COMBINATION,

OPEN END AND 15^o OFFSET BOX OPENING

The General Services Administration has authorized the use of this

Commercial Item Description in lieu of Federal Specification GGG-W-636.

Salient Characteristics:

Conforms to ANSI B107.6, type III, in sizes as specified.

Each box opening shall have 12 points (double hexagon), except that 7/16-inch or smaller wrenches may have 6- or 12-point (hexagon or double hexagon) box opening.

The issue of ANSI B107.6 in effect on the date of the solicitation shall be used to determine compliance with stated requirements.

Certification. The contractor shall certify that the product offered meets the salient characteristics of this description, and that the product conforms to the producer’s own drawings, specifications, standards and quality assurance practices and is the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

Recovered materials. The manufacturer shall utilize recovered materials to the maximum extent practicable.

Preservation, packaging, packing, and marking. The preservation, (when applicable), packaging, and packing, shall be in accordance with normal commercial practice and shall assure acceptance by common carrier and provide product protection during multiple shipments, handling, and storage. The shipping container shall be in compliance with the National Motor Freight Classification and Uniform Freight Classification. Marking shall be as specified in the contract or order.

ANSI Standards are available from American National Standards Institute, Inc., 1430 Broadway, New York, NY 10018.