A-A-436
October 12, 1979
COMMERCIAL ITEM DESCRIPTION
DRIVER, PROJECTILE UNIT, .38 CALIBER, UNDERWATER
The General Services Administration has authorized the use of this commercial item description.
Salient characteristics:
Designed exclusively for installing fasteners underwater in depths down to 600 feet.
Capable of installing any PATMI standard 3/8 inch diameter, 1-1/4 inch to 4 inches long, threaded stud or drive pin into steel up to 1 inch and into concrete of any comprehensive strength.
Utilizes an expendable barrel preloaded with a .38 caliber charge.
Treated to resist corrosion and wear.
Maximum weight 7-1/2 pounds.
Maximum length 15-1/2 inches.
Furnished with : Carrying case
Instruction and Operation manual
Loading rod
Test barrel
Spare parts kit
Rust preventative lubrication
Lubrication grease
Workmanship. shall be free of defects that may impair serviceability and durability.
Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices, and is the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Recovered materials. The manufacturer shall uti;ize recovered materials to the maximum extent practicable.
Preservation, packaging, packing, and marking. The drivers shall be preserved, packaged, and packed in accordance with normal commercial practice to assure acceptance by common carrier and provide product protection against loss and damage during multiple shipments, handling and storage. The shipping container shall be in compliance with National Motor Freight Classification and Uniform Freight Classification. Marking shall be in accordance with the contract or order.
Note: Assigned National Stock Number (NSN) 5130-00-387-9961.
PATMI Standards are available from the Powder Actuated Tool Manufacturer’s Institute, Inc., 331 Modison Avenue, New York, NY 10017.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business