MIL-DTL-81306B
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AS23190
-
Straps, Clamps, and Mounting Hardware,
Plastic and Metal for Cable Harness Tying and
Support. (DoD Adopted.)
SAE-AS23190/3
-
Straps, Clamps, and Mounting Hardware,
Plastic and Metal for Cable Harness Tying and
Support Strap, Tiedown, Adjustable, Corrosion
Resistant Steel Type VI, Class 1. (DoD
Adopted.)
SAE-AS33671
-
Strap, Tiedown, Electrical Components,
Adjustable, Self-Clinching, Plastic, Type I,
Class 1. (DoD Adopted.)
(Copies of these documents are available from the Society of Automotive Engineers, 400
Commonwealth Drive, Warrendale, PA 15096-0001 or https://www.sae.org)
2.4 Order of precedence. In the event of a conflict between the text of this document
and the references cited herein (except for related specification sheets), the text of this document
takes preference. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheet. The individual item requirements shall be as specified herein and
in accordance with the applicable specification sheet. In the event of any conflict between the
requirements of this specification and the specification sheet, the latter shall govern.
3.2 Qualification. The installation tools furnished under this specification shall be products
that are manufactured by a manufacturer authorized by the qualifying activity for listing on the
applicable qualified products list before contract award (see 4.2 and 6.3).
3.3 Materials and components. Materials and components used in the fabrication of tools
covered by this specification shall be capable of meeting the requirements of this specification
and MS90387.
3.3.1 Finish. All metal parts shall withstand the corrosion test of 4.5.8.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business