A-A-1346A
Corrosion Test. The exterior surfaces of sample wrenches shall be tested for corrosion resistance by exposure to a 72-hour salt spray test, as specified in ASTM B 117, Operating salt spray (FOG) apparatus, without falling below the ASTM B 537, Standard practice for rating of electroplated panels subjected to atmospheric exposure, rating of 6.
4. REGULATORY REQUIREMENTS.
4.1 Recovered Materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. PRODUCT CONFORMANCE.
5.1 Product Conformance. The product provided shall meet the salient characteristics of this Commercial Item Description, conform to the producer’s own drawing, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
5.2 Responsibility for Inspection. Unless otherwise specified, the contractor is responsible for the performance of all inspection requirements and may use any commercial facilities (including the contractor’s own facilities) suitable for performance of the inspection requirements, unless disapproved by the Government. The Government reserves the right to perform any of the inspections deemed necessary to assure the item conforms to the specified requirements.
6. PACKAGING. Preservation, packaging, and marking shall be as specified in the contract or order.
7. NOTES. This section contains information of a general or explanatory nature that is not mandatory.
7.1 Source of Documents.
American Society of Mechanical Engineers (ASME), Manuel Gutierrez, Managing Director, 3 Park Avenue, New York, NY 10016.
American Society for Testing and Materials (ASTM), 100 Barr Harbor Dr., W. Conshohocken, PA, 19428-2959.
7.2 Ordering data. Purchasers should select the preferred options permitted herein and should include the following information in procurement documents.
(a) Title, number and date of Commercial Item Description.
(b) Wrench Opening.
(c) Packaging requirements.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business