[INCH-POUND] A-A-50765A October 7, 1996
SUPERSEDING A-A-50765
January 14, 1985
COMMERCIAL ITEM DESCRIPTION FORCEPS, SHEET HOLDER
General Services Administration has authorized the use of this commercial item description
(CID) in preference to Federal Specification GGG-F-570.
1. SCOPE. This commercial item description covers one type of forceps used for inserting and removing sheet holders during fabrication of components from sheet metal.
2. SALIENT CHARACTERISTICS:
2.1 Material. This tool shall be constructed from materials that resist corrosion and are suitable to withstand all requirements and tests of this CID.
2.2 Handles. Handles shall be constructed to provide a comfortable grip, free of sharp edges.
2.3 Jaw. The jaw portion of the forceps shall have provisions such as recesses or counter- bores, to prevent the sheet holders from slipping from the jaws of the tool.
2.4 Application. Forceps shall be usable for installation and removal of sheet metal holders conforming to table 1.
2.5 Length. Maximum overall length of the forceps shall be 8 inches.
Beneficial comments, recommendations, additions, deletions clarifications, etc, and any other data which may improve this document should be sent to:WR-ALC/TILCC 255
Second Street, Suite 122 Robins AFB, GA 31098-1640.
AMSC N/A FSC 5120
DISTRIBUTION STATEMENT A. Approved for public release, Distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business