A-A-50096
specified type; any component fractured, split, dented, bowed, malformed, damaged, loose, knots, heavy stain, or slight failure; markings in wrong location, incomplete, illegible, or not as specified.
2.5 Dimensional examination. The hammers shall be examined without damaging or disassembling the hammers. Any dimension not within the specified tolerances shall be classified as a defect. The lot size shall be expressed in units of hammers. The sample unit shall be one hammer. The inspection level shall be S-3 and the AQL, expressed in terms of defects per hundred units, shall be 1.7.
3. PACKAGING
3.1 Packaging. Each hammer shall be unit packed in a snug-fitting fiberboard box fabricated from 200-pound test corrugated fiberboard.
3.2 Packing. Twelve hammers, unit packed as specified, shall be packed in a snug-fitting fiberboard shipping container conforming to style RSC, type CF, class domestic, grade 275 of PPP-B-636. The shipping container shall be completely filled with no voids and be of a size that can be palletized in accordance with MIL-STD-147. Each shipping container shall be closed in accordance with the appendix of PPP-B-636.
3.3 Palletization. When specified (see 4.1), hammers packed as specified, shall be palletized on a 4-way entry pallet in accordance with load type Ia of MIL-STD-147. Each prepared load shall be bonded with primary and secondary straps in accordance with bonding means C and D, or film bonding means F or G, in accordance with MIL-STD-147.
3.4 Marking. In addition to any special markings required by the contractor or purchase order, unit packs, shipping containers and palletized unit loads shall be marked in accordance with MIL-STD-129.
4. NOTES
4.1 Ordering data.
a. Title, number, and date of this document.
b. When palletization is required (see 3.3).
4.2 Sources of documents.
4.2.1 Source of government documents. Copies of Military and Federal documents are available from:
Standardization Documents Order Desk
Building 4D
700 Robbins Avenue
Philadelphia, Pa 19111-5094
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business