MS90387H
TABLE II. Tool and plastic tiedown strap cross-reference.
Tool |
Plastic Tiedown Strap Sizes |
|||
MS part number |
Tension setting range (see note 4) |
MS part number |
Strap identification code |
Strap min tensile, pounds (reference) |
MS90387-1 MS90387-5 (See note 4) |
1-3 |
MS3367-4, -26 MS3368-5 |
Min (Miniature) |
18 |
3-5 |
MS3367-5, -27 |
Int. (Intermediate) |
30 |
|
6-8 |
MS3367-1, -2, -7, -23, -24, -29 MS3368-1, -2, -3, -4 |
Std (Standard) |
50 |
|
MS90387-2 |
1-4 |
MS3367-1, -2, -7, -23, -24, -29 MS3368-1, -2, -3, -4 |
Std (Standard) |
50 |
5-8 |
MS3367-3, -6, -8 to -18, -25, -28 |
Hvy (Heavy) |
120 |
|
MS90387-3 |
1-4 |
M23190/3-1 to /3-4 |
Std (Standard) |
100 |
5-8 |
M23190/3-5 to /3-9 |
Hvy (Heavy) |
250 |
|
MS90387-4 |
1-4 |
MS3367-3, -6, -8, -18 to -25, -28 |
Hvy (Heavy) |
120 |
5-8 |
MS3367-19 to -22 |
EH (Extra heavy) |
250 |
|
REQUIREMENTS:
1. Finish: See MIL-DTL-81306.
2. Tools shall have no burrs, sharp edges or sharp corners.
3. The index line and eight tension station lines shall be clear and distinguishable. Increasing station line numbers shall represent increasing tension load (see note 2).
4. Instructions and part numbers shall have white or silver lettering on a field colored as
specified in table I and shall be securely attached to the tool. Tension setting ranges correlated to the strap identification codes specified in table II shall be indicated on the tool (see note 3).
5. The handle shall be spring returned, shall facilitate grasping, and shall be colored same as the instructions field.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business