MS90387H
6. The tool tension setting shall not change during consecutive operations.
7. The tool shall tension and automatically sever the strap without detriment to strap performance as specified by SAE-AS23190. The tool shall be designed to cut the strap parallel with the strap head.
8. The entry edge(s) of the strap guide shall permit easy entry of the strap.
9. MS90387 shall be the only tools to be procured and stocked for government use to install plastic and metal tiedown straps.
10. For design feature purposes, this specification sheet takes precedence over procurement documents referenced herein.
11. Referenced documents shall be the issue in effect on date of invitations for bids, or request for proposal, except that referenced adopted industry documents shall give the date of the issue adopted.
NOTES:
1. All dimensions are in inches.
2. Additional information regarding increasing tension direction (such as indicating arrows) may be added at manufacturer's option.
3. The tension setting ranges are for typical wire bundle applications. Settings less or greater than the ranges specified may be necessary for special applications.
4. The compact tool - 5 is recommended for smaller handgrips.
5. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business